View JBZ-25P-90_3760872.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

676 part name material and finish current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage connector plug receptacle contact insulator shell contact insulator shell brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black steel, copper-undercoated, tin/lead-plated phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black steel, copper-undercoated, tin/lead-plated 3a, ac, dc (2a for 37-circuits) 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) initial value/15m ? ? ? d subminiature connector j series solder pot plug and receptacle d-sub j solder pot plug solder pot plug and receptacle 01 specifications series name shell size: e, a, b ,c wire connection style: z ... solder pot type number of circuits: 9, 15, 25, 37 connector style: p ... plug, s ... receptacle finish blank ... gold-plated (flash) 12 ... 0.2micron(8micro-inch) gold-plated 13 ... 0.4micron(16micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated 90 ... tin-plated jez 9p 12 ?? solder pot receptacle ?the receptacle contacts are formed by high-speed stamping presses to obtain the advantages of cold working. they are therefore highly elastic, which in turn ensures reliable connection even after many mating cycles. ?the dimples in the plug shell ensure continuity between it and the receptacle shell, thus providing complete shielding. ?costs are kept low by selective gold plating the contacts. ?the solder cup portions of the contacts are tin-plated for easy soldering. ?insulator housings are made of a heat-resistant glass-filled pbt resin. features note: 1. the relationship between number of circuits and shell size is shown below. 9: e, 15: a, 25: b, 37: c 2. contact jst for special plating requirements. note: contact jst for details. model number identification materials characteristics standards 0 recognized e60389 1 certified lr20812 * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details.
677 plug b c a 3.05(.120)dia. 12.55(.494) 8.35(.329) 10 [10.72(.422)] [5.95(.234)] 2.84(.112) q ? ty / box circuits model no. gold-plated tin-plated a b c dimensions mm(in.) 9 15 25 37 jez- 9p jaz-15p jbz-25p jcz-37p jez- 9p-90 jaz-15p-90 JBZ-25P-90 jcz-37p-90 16.92( .666) 25.25( .994) 38.97(1.534) 55.43(2.182) 24.99( .984) 33.32(1.321) 47.04(1.852) 63.50(2.500) 30.80(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 100 100 50 50 receptacle b c a 3.05(.120)dia. 12.55(.494) 7.9(.311) [10.9(.429)] 6.18 (.243) 2.84(.112) 10 q ? ty / box circuits model no. gold-plated tin-plated a b c dimensions mm(in.) 9 15 25 37 jez- 9s jaz-15s jbz-25s jcz-37s jez- 9s-90 jaz-15s-90 jbz-25s-90 jcz-37s-90 16.34( .643) 24.67( .971) 38.38(1.511) 54.84(2.159) 24.99( .984) 33.33(1.312) 47.04(1.852) 63.50(2.500) 30.80(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 100 100 50 50 d subminiature connector j series
678 right angle through-hole plug (with hexagonal lock screw blocks) right angle through-hole receptacle (with spring lock devices) right angle through-hole plug and receptacle 01 right angle through-hole receptacle (with rectangular lock screw blocks) the receptacle contacts are made by high-speed stamping presses. this promotes the uniform elasticity of the twin-contact mating sections and therefore ensures reliable contact even after repeated mating cycles. the solder tails are u-shaped for extra strength. costs are minimized by selective gold plating, high speed stamping presses, and completely automated assembly. to ensure complete shielding, a wide variety of grounding adapters are available so that the receptacles can be grounded to different kinds of supporting structures. metric, inch or other lock screw blocks are available for fastening mating plugs. features d subminiature connector j series right angle through-hole plug and receptacle d-sub j
679 specifications part name material and finish contact of plug contact of receptacle insulator shell hexagonal lock screw block rectangular lock screw block grounding adapter having a 3.2mm(.126") dia. hole grounding adapter having an m3 tapped hole grounding adapter having a spring lock lever brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated phosphor bronze, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black steel, copper-undercoated, nickel-plated steel, copper-undercoated, nickel-plated zinc, copper-undercoated, nickel-plated steel, copper-undercoated, nickel-plated brass, copper-undercoated, tin/lead-plated series name shell size: e, a, b ,c wire connection style: y... right angle through-hole style number of circuits: 9, 15, 25, 37 connector style: p ... plug, s ... receptacle connector construction/dimensions: standard j series types of grounding adapters 0 ... without grounding adapters 1 ... with grounding adapters having a 3.2mm(.126") dia. hole 2 ... with grounding adapters having an m3 thread 3 ... with grounding adapters having a spring lock device (1) 4 ... with grounding adapters having a spring lock device (2) types of lock screw blocks a ... with hexagonal lock screw blocks having a no. 4-40 unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread c ... with rectangular lock screw blocks having an m2.6 thread d ... without lock screw blocks e ... without lock screw blocks, but with grounding adapters having a 3.05mm(.120") dia. hole f ... without lock screw blocks, but with grounding adapters having a no. 4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread finish blank ... gold-plated (flash) 12 ... 0.2micron(8micro-inch) gold-plated 13 ... 0.4micron(16micro-inch) gold-plated 14 ... 0.76micron(30micro-inch) gold-plated 90 ... tin-plated spring lock devices blank...without spring lock devices s or s1...with spring lock devices s2...with spring lock devices (with addition of spring characteristic) je y 9 s ?? 1a 3 a 12 s1 model number identification materials current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage applicable pc board thickness 3a, ac, dc (2.0a ac, dc for 37-circuits) 250v ac, dc - 40 ? c to + 85 ? c (including temperature rise in applying electrical current) initial value/15m ? max. after environmental testing/30m ? max. 5,000m ? min. 1,000v ac/minute 1.6mm(.063") characteristics note: contact jst for details. note: 1. the relationship between number of circuits and shell size is shown below. 9: e, 15: a, 25: b, 37: c 2. contact jst for special plating requirements. 3. contact jst for the receptacle with spring lock devices. (not ul recognized nor csa certified.) d subminiature connector j series standards 0 recognized e60389 1 certified lr20812 * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details.
680 d subminiature connector j series m2.6 no.4-40unc right angle through-hole plug type a type b without grounding adapters with grounding adapters with a 3.2mm (.126") dia. hole with grounding adapters with an m3 thread with grounding adapters with a spring lock device (1) with grounding adapters with a spring lock device (2) with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m2.6 thread 0a 0b 1a 1b 2a 2b 3a 3b 8.35(.329) [18.6(.732)] [5.95 (.234)] a b c 12.55(.494) 3.2 (.126) 0.75 (.030) e 0.6 (.024) d 2.84 (.112) h 2.84 (.112) 10 q'ty / box model no. dimensions mm(in.) abc tin-plated plug jey- 9p-1a** jay-15p-1a** jby-25p-1a** jey- 9p-1a**90 jay-15p-1a**90 jby-25p-1a**90 16.90( .665) 25.25( .994) 38.97(1.534) 24.99( .984) 33.33(1.312) 47.04(1.852) 30.80(1.213) 39.14(1.541) 53.00(2.087) 100 60 40 cir- cuits 9 15 25 gold-plated plug note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a no.4-40unc inch thread and without grounding adapters is required, specify the model number as jey-9p-1a0a. h: height of the lock screw block (for types a, b & c) de 8.1(.319) 8.1(.319) 8.2(.323) 9.52(.375) 9.52(.375) 9.62(.379)
681 d subminiature connector j series m3 m2.6 no.4-40unc 3.05mm (.120")dia. hole m2.6 type c type d type e type f type g type h 0c 0d 1c 1d 2c 2d 3c 3d 1e 1f 2e 2f 3e 3f 1g 2g 3g with rectangular lock screw blocks (h: 6.2mm (.244")) having an m2.6 thread without lock screw blocks without lock screw blocks e: grounding adapter has no thread. f, g, h: grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) use a lock screw block of model number jfs-( )s-c1n. *1: no.4-40unc inch thread *2: model number jfs-4s-( )1w(m) *1: m2.6 thread *2: model number jfs-2.6s-( )1w(m) *1: m3 thread *2: model number jfs-3s-( )1w(m) 4h
682 d subminiature connector j series m2.6 no.4-40unc right angle through-hole receptacle type a type b without grounding adapters with grounding adapters with a 3.2mm (.126") dia. hole with grounding adapters with an m3 thread with grounding adapters with a spring lock device (1) with grounding adapters with a spring lock device (2) with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m2.6 thread 0a 0b 1a 1b 2a 2b 3a 3b [18.8(.740)] 6.18 (.243) a b c 12.55(.494) 3.2 (.126) 0.7 (.028) e 0.6 (.024) d 2.84 (.112) h 2.84 (.112) 7.9(.311) 10 q'ty / box model no. dimensions mm(in.) abc tin-plated receptacle jey- 9s-1a** jay-15s-1a** jby-25s-1a** jcy-37s-1a** jey- 9s-1a**90 jay-15s-1a**90 jby-25s-1a**90 jcy-37s-1a**90 16.34( .643) 24.67( .971) 38.38(1.511) 54.84(2.159) 24.99( .984) 33.32(1.312) 47.04(1.852) 63.50(2.500) 30.81(1.213) 39.14(1.541) 53.04(2.088) 69.32(2.729) 100 60 40 40 cir- cuits 9 15 25 37 gold-plated receptacle note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a 9-circuit gold-plated plug with hexagonal lock screw blocks having a no.4-40unc inch thread and without grounding adapters is required, specify the model number as jey-9s-1a0a. h: height of the lock screw block (for types a, b & c) de 8.1(.319) 8.1(.319) 8.2(.323) 8.2(.323) 9.52(.375) 9.52(.375) 9.62(.379) 9.62(.379)
683 d subminiature connector j series m3 no.4-40unc m2.6 3.05mm (.120")dia. hole m2.6 type c type d type e type f type g type h 0c 0d 1c 1d 2c 2d 3c 3d 1e 1f 2e 2f 3e 3f 1g 2g 3g with rectangular lock screw blocks (h: 6.2mm (.244")) having an m2.6 thread without lock screw blocks without lock screw blocks e: grounding adapter has no thread. f, g, h: grounding adapters have a thread (*1) for securing separately-purchased lock screw blocks (*2) used a lock screw block [model number jfs-( )s-c1n] *1: no.4-40unc inch thread *2: model number jfs-4s-( )1w(m) *1: m2.6 thread *2: model number jfs-2.6s-( )1w(m) *1: m3 thread *2: model number jfs-3s-( )1w(m) 4h
684 d subminiature connector j series pc board layout (viewed from component side) 5.49 the connector can be mounted either on the front side or on the rear side of the panel as shown above. use m2.5 or m2.6 screws for installation. note: the dimensions above should serve as a guideline. contact jst for details. mounting on the rear side mounting on the front side b 10 note: 1. tolerances are non-cumulative: 0.05mm ( .002") for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details.
685 d subminiature connector j series straight through-hole plug and receptacle d-sub j straight through-hole plug (with hexagonal lock screw blocks) straight through-hole plug and receptacle 01 straight through-hole receptacle (without lock screw blocks, but with grounding adapters having a no.4-40unc inch thread) ?three standard types are available with different dimensions between the flange and solder tail: 6mm (.236"), 9mm (.354"), and 12mm (.472"). ?the roots of the contact leads are covered to prevent flux from rising into the connector during soldering. ?a grounding adapter with a spring lock device allows the connector to be temporarily secured onto the printed circuit board so that the connector can be soldered easily. standards eeeeeeeeeeeeeeeeeeeeee 0 recognized e60389 1 certified lr20812 features eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee 6.0 (.236) 9.0 (.354) 12.0 (.472) * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details.
686 d subminiature connector j series part name material and finish contact insulator shell heaxagonal lock screw block grounding adapter with spring lock device plug receptacle brass, nickel-undercoated, selective gold-plated phosphor bronze, nickel-undercoated, selective gold-plated glass-filled pbt, ul94v-0, black steel, copper-undercoated, nickel-plated steel, copper-undercoated, nickel-plated brass, copper-undercoated, tin/lead-plated current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage applicable pc board thickness 3a ac, dc 250v ac, dc - 40?c to + 85?c (including temperature rise in applying electrical current) initial value/15m ? ? ? materials characteristics *contact jst for details. no.4-40unc 3a with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread type a straight through-hole plug with grounding adapters with a spring lock device 6.0 mm (.236") type 9.0 mm (.354") type 12.0 mm (.472") type a b c h 6.0 (.236) 9.0 (.354) 5.95 (.234) 3.5 (.138) 2.7 (.106) 12.55(.494) 8.35(.329) [15.04(.592)] 7.6(.299) 2.84(.112) h 12.0 (.472) h 2.84(.112) 3.2 (.126) 0.5(.020) 2.7 (.106) d d 3.5 (.138) 5.95 (.234) 3.2 (.126) [21.04(.828)] 2.7 (.106) 3.5 (.138) 5.95 (.234) [18.04(.710)] 3.2 (.126) 10 jes- 9p-2a** jes- 9p-3a** jes- 9p-4a** 6 (.236) 9 (.354) 12 (.472) 25 jbs-25p-2a** jbs-25p-3a** jbs-25p-4a** 6 (.236) 9 (.354) 12 (.472) gold-plated 0.76micron(30micro-inch) jes- 9p-2a**14 jes- 9p-3a**14 jes- 9p-4a**14 jbs-25p-2a**14 jbs-25p-3a**14 jbs-25p-4a**14 50 abcd dimensions mm(in.) 16.90 (.665) 24.99 (.984) 30.8 (1.213) 2.4 (.094) 38.97 (1.534) 47.04 (1.852) 53.0 (2.087) 2.5 (.098)
687 series name shell size: b, e wire connection type: s ... straight through-hole type number of circuits: 9, 25 connector type: p ... plug s ... receptacle connector construction/dimensions: 2a ... 6.0 mm (.236") from flange to solder tail 3a ... 9.0 mm (.354") from flange to solder tail 4a ... 12.0mm (.472") from flange to solder tail types of grounding adapter: 3 ... grounding adapter with a spring lock device types of lock screw block: a ... with hexagonal lock screw blocks having a no. 4-40unc inch thread b ... with hexagonal lock screw blocks having an m2.6 thread f ... without lock screw blocks, but with grounding adapters having an no.4-40unc inch thread g ... without lock screw blocks, but with grounding adapters having an m2.6 thread h ... without lock screw blocks, but with grounding adapters having an m3 thread j ... with hexagonal lock screw block having an m3 thread finish blank ... gold-plated(flash) 12 ... 0.2micron(8micro-inch)gold-plated 13 ... 0.4micron(16micro-inch)gold-plated 14 ... 0.76micron(30micro-inch)gold-plated 90 ... tin-plated spring lock devices blank...without spring lock devices s or s1...with spring lock devices (round type) s2...with spring lock devices (with addition of spring characteristic, round type) s3...with spring lock devices (with addition of spring characteristic, rhombus type) ? j bs25 ? p2a3 f14 s1 note: 1. in the j series, the number of circuits is determined by the shell size: 9 circuits for e and 25 circuits for b. 2. contact jst for special plating requirements. 3. contact jst for the dimensions between the flange and solder tail other than those listed above. 4. grounding adapters that can secure printed circuit boards are also available. model number identification d subminiature connector j series m3 m3 m2.6 no.4-40unc m2.6 type b without lock screw blocks f, g, h: grounding adapters have a thread (*1) for securing separately- purchased lock screw blocks (*2) type f type g type h type j with hexagonal lock screw blocks (h: 6.3mm(.248")) having an m2.6 thread *1: no.4-40unc inch thread *2: model number sfs-4s-( )1w(m) *1: m2.6 thread *2: model number sfs-2.6s-( )1w(m) *1: m3 thread *2: model number sfs-3s-( )1w(m) with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m3 thread 3b 3f 3g 3h 3j
688 d subminiature connector j series 3a with hexagonal lock screw blocks (h: 6.3mm (.248")) having a no.4-40unc inch thread type a straight through-hole receptacle with grounding adapters with a spring lock device 6.0 mm (.236") type 9.0 mm (.354") type 12.0 mm (.472") type no.4-40unc a b c d 6.0 (.236) 6.18 (.243) 2.7 (.106) 12.55(.494) 7.9(.311) [15.38(.606)] 7.6(.299) 2.84(.112) 2.84(.112) 3.2 (.126) 0.5(.020) 2.7 (.106) [21.38(.842)] 2.7 (.106) [18.38(.724)] hd hd h 6.18 (.243) 6.18 (.243) 9.0(.354) 12.0(.472) 6.0 (.236) 6.0 (.236) 3.2 (.126) 3.2 (.126) 10 jes- 9s-2a** jes- 9s-3a** jes- 9s-4a** jbs-25s-2a** jbs-25s-3a** jbs-25s-4a** tin-plated - - - jbs-25s-2a**90 jbs-25s-3a**90 - jes- 9s-2a**14 jes- 9s-3a**14 jes- 9s-4a**14 jbs-25s-2a**14 jbs-25s-3a**14 jbs-25s-4a**14 16.34 (.643) 38.38 (1.511) 24.99 (.984) 47.04 (1.852) 30.8 (1.213) 53.0 (2.087) 2.4 (.094) 2.5 (.098) 50 h: height of the lock screw block (for types a, b & j) note: ** shows the location where a two-digit code (see the table below for codes) should be entered. for example, if a gold- plated (flash) receptacle with hexagonal lock screw blocks having a no. 4-40unc inch thread and without grounding adapters whose dimension between flange and solder tail is 6.0mm(.236") is required, specify the model number as jes-9s-2a3a. 100 pc board layout (viewed from component side) (9-circuits) (25- circuits) 5.49 note: 1. tolerances are non-cumulative: 0.05mm ( .002") for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details.
689 panel layout b 10 d subminiature connector j series type b without lock screw blocks f, g, h: grounding adapters have a thread (*1) for securing separately- purchased lock screw blocks (*2) type f type g type h type j with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m2.6 thread *1: no.4-40unc inch thread *2: model number sfs-4s-( )1w(m) *1: m2.6 thread *2: model number sfs-2.6s-( )1w(m) *1: m3 thread *2: model number sfs-3s-( )1w(m) with hexagonal lock screw blocks (h: 6.3mm (.248")) having an m3 thread 3b 3f 3g 3h 3j m2.6 no.4-40unc m2.6 m3 m3 note: the dimensions above should serve as a guideline. contact jst for details.
690 d subminiature connector j series crimp style plug and receptacle d-sub j connector material and finish part name plug receptacle pin contact insulator shell socket contact insulator shell brass, nickel-undercoated, selective gold-plated or copper-undercoated, tin-plated glass-filled pbt, ul94v-0, black steel, copper-undercoated, tin/lead-plated phosphor bronze, nickel-undercoated, selective gold-plated glass-filled pbt, ul94-0, black steel, copper-undercoated, tin/lead-plated pin contact crimp style plug and receptacle eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee 01 specifications eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee contact series name product shape: s ... chain, b ... loose piece type of contact: p ... pin contact, s ... socket contact applicable wire: 1 ... awg #24 to #20, 2 ... awg #28 to #24 material: 1 ... brass(pin contact), 3 ... phosphor bronze(socket contact) finish 40 ... gold-plated (flash) 42 ... 0.2micron(8micro-inch) gold-plated 43 ... 0.4micron(16micro-inch)gold-plated 44 ... 0.76micron(30micro-inch) gold-plated 90 ... tin-plated note: contact jst for special plating requirements. housing series name shell size: e, a, b ,c wire connection style: c ... crimp style number of circuits: 9, 15, 25, 37 connector style: p ... plug, s ... receptacle note: the relationship between number of circuits and shell size is shown below. 9: e, 15: a, 25: b, 37: c p ? 1 240 s j ? j e c 9 p socket contact the contacts of this plug are formed by high-speed stamping presses into continuous strips that can be automatically fed into our compact crimping machines. much less time is required to assemble crt and rs-232c round cables using this plug than when soldering connections. the contacts in this connector are selectively gold-plated. moreover, jst's advanced technological knowledge and experience are fully utilized to significantly reduce production costs. the dimples in the connector shell provide the ground connection and are important factors in preventing electromagnetic interference. the contact has a lance that can be visually checked during assembly. this assures accurate assembly and reduces defects. features eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee note: contact jst for details. model number identification materials characteristics crimp style plug crimp style receptacle current rating voltage rating temperature range contact resistance insulation resistance withstanding voltage 3a, ac, dc (2a for 37-circuits)(awg #20) 250v ac, dc - 40 ? c to + 85 ? c (including temperature rise in applying electrical current) initial value/15m ? ? ? standards eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee 0 recognized e60389 1 certified lr20812 * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details.
691 pin contact (for plug housing) 16.3(.642) 5.8(.228) 3.6(.142) 1.0(.039) 1.9(.075) q ty / reel model no. pin contact applicable wire socket contact gold-plated tin-plated gold-plated awg # lnsulation o.d. mm(in.) *j-sp1140 j-sp2140 *j-sp1190 j-sp2190 *j-ss1340 j-ss2340 #24 to #20 #28 to #24 1.1 to1.8mm(.043" to .071") 0.9 to1.3mm(.035" to .051") 10,000 socket contact (for receptacle housing) 15.3(.602) 4.25(.167) 3.6(.142) 1.4(.055) 1.9(.075) note: models marked * are not csa certified. plug housing b c a [10.8(.425)] [10.7(.421)] 12.55(.494) 3.05 (.120)dia. 2.84(.112) 8.35(.329) 7.0(.276) 10 b c a 6.18 (.243) [10.9(.429)] [10.7(.421)] 12.55(.494) 3.05 (.120)dia. 2.84(.112) 7.9(.311) 7.0(.276) 10 jec- 9s jac-15s jbc-25s 100 100 50 model no. q ? ty / box jec- 9p jac-15p jbc-25p jcc-37p 100 100 50 50 cir- cuits abc dimensions mm(in.) model no. q ? ty / box d subminiature connector j series contact crimp applicator mks-l compact crimp applicator mks-ls strip-crimp applicator mks-sc with safety cover without safety cover with safety cover without safety cover with safety cover applicator for the semi-automatic press ap-k2n j-sp1*** aplmk j-sp/ss1 aplnc j-sp/ss1 aplsc j-sp/ss1 j-ss1*** aplmk j-sp/ss1 aplnc j-sp/ss1 aplsc j-sp/ss1 j-sp2*** aplmk j-sp/ss2 aplnc j-sp/ss2 aplsc j-sp/ss2 j-ss2*** aplmk j-sp/ss2 aplnc j-sp/ss2 aplsc j-sp/ss2
715 j cover ? t his shielding cover is made of steel, formed by our advanced stamping technology, and nickel-plated. ? the box-shaped cover completely encloses such emi radiating areas as the connections between the connector and wires. the result is a superior shielding effect. ? to install the shielding cover, simply align and press the upper and lower cover elements, then tighten the nuts. it then securely grips the round cables. ? this cover is so compact, light and sturdy, that it can be used to cover the connectors of any input/output cable. moreover, it is attractive in appearance. features l 16.4(.646) w 6.0 (.236) 10.0 (.394) shielding cover a j series jk series model no. model no. cir- cuits cir- cuits dimensions mm(in.) wl q'ty / box material and finish 9 15 25 37 j-sc 9a j-sc15a j-sc25a j-sc37a 15 jk-sc15a 19.4( .764) 27.6(1.087) 41.4(1.630) 57.8(2.276) 42.0(1.654) 46.9(1.846) 57.0(2.244) 70.6(2.780) steel, copper- undercoated, nickel-plated 200 150 100 125 l 16.6(.654) 10.0 (.394) w 3.0 (.118) dia. shielding cover b circuits j series jk series q'ty / box model no. dimensions mm(in.) w l material and finish 9 15 25 37 15 j-sc 9b j-sc15b j-sc25b j-sc37b 30.0(1.181) 38.0(1.496) 52.0(2.047) 68.0(2.677) [42.0(1.654)] [49.7(1.957)] [57.0(2.244)] [70.6(2.780)] 200 150 150 100 steel, copper-undercoated, nickel-plated note: the cover of the jk series 15-circuit connector is the same as that of the j series 9-circuit connector, except for the number of circuits indicated. note: the cover of the jk series 15-circuit connector is the same as that of the j series 9-circuit connector. j cover emi prevention shielding cover ( j cover) d j&jk series subminiature connector accessories cover cover nut * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. circuits cable outer diameter mm(in.) j series jk series 9 15 25 37 15 7.0 0.2(.276 .008) 8.0 0.2(.315 .008) 10.0 0.2(.394 .008) applicable cable dimensions
716 d subminiature connector j&jk series j series model no. circuits model no. circuits jk series parts in one set q'ty / box 9 15 25 37 j-c 9-( )c j-c15-( )c j-c25-( )c j-c37-( )c 15 jk-c15-( )c shielding cover a shielding cover b cover nut lock screw e-ring 25 25 20 10 1 pc. 1 pc. 1 pc. 2 pcs. 1 set model no. type of screw q'ty / box material and finish no.4-40unc (inch thread) m2.6 (metric thread) m3 (metric thread) j-sl-1c j-sl-2c j-sl-3c steel, copper-undercoated, nickel-plated 5,000 5,000 5,000 note: in the above lock screw model numbers, the number in parentheses indicates the type of screw-1: inch thread (no.4-40unc), 2: metric thread (m2.6), 3: metric thread (m3). use the following model nos. when ordering j-covers as a set. no.4-40unc 5.7(.224) 4.5(.177) 1.7(.067) 2.7(.106) m2.6 5.7(.224) 4.5(.177) 1.7(.067) 2.7(.106) m3 5.7(.224) 4.5(.177) 1.7(.067) 2.7(.106) lock screw no.4-40unc (inch thread) m2.6 (metric thread) m3 (metric thread) l d d cover nut cir- cuits q'ty / box material model no. d d l 9 15 25 37 j-cn9 . 15 j-cn25 j-cn37 13.6(.535) 16.4(.646) 18.8(.740) 7.2(.283) 8.4(.331) 10.4(.409) 25.0( .984) 28.0(1.102) 19.0( .748) glass-filled, pbt, ul94v-0, black 1,000 1,000 1,500 note: the cover nuts, lock screws and e-rings are used with both the j and jk series connectors. 5.0 (.197) dia. 16.4(.646) thickness 0.4 (.016) e-ring material model no. q'ty / box j-er stainless steel 5,000
717 j-cover assembly procedure 6 1 7 3 4 2 e-ring connector lock screw cover nut copper foil tape meshed wire shielding cover a lance shielding cover b a c b 14.0 (.551) wire 5 a c b 14.0 (.551) e-ring contact shielding cover b lock screw cover nut copper foil tape wire lance meshed wire crimp style plug shielding cover a j series jk series assembly procedure 1. connect wires to the connector by soldering or crimping. 2. fold back the braided shielding wire along the outside insulation and wind the copper foil tape around the shielding wire. 3. install the connector into shielding cover a. 4. screw the lock screws onto shielding cover b. 5. install the e-rings. 6. align shielding cover b with shielding cover a and press shielding cover b until it engages the lances of shielding cover a. 7. tighten the cover nut until the predetermined position is reached. note: for details of the j-cover assembly procedure, please refer to the processing specifications separately available. the shielding effect of the j-cover is critically dependent on proper assembly. circuits j series jk series dimensions mm(in.) abc 9 15 25 37 15 24.99( .984) 33.32(1.312) 47.04(1.852) 63.50(2.500) [49.0(1.929)] [53.0(2.087)] [64.5(2.539)] [78.5(3.091)] 13.6(.535) 13.6(.535) 16.4(.646) 18.9(.744) dimensions after assembly d subminiature connector j&jk series
718 emi prevention overmolding cover d j&jk series subminiature connector accessories circuits j series jk series cable o.d.mm(in.) 9 15 25 15 8.6 0.2(.339 .008) 7.6 0.2(.299 .008) 8.6 0.2(.339 .008) mold cover this cover completely encloses all wire connections to the connector, and its braided wire crimp section ensures a reliable ground connection. the result is excellent shielding. this cover is sturdy enough to withstand the high pressure necessary during overmolding. it can thus be finish-molded directly . features note: contact jst for cables other than those listed above. ferrule l d dia. t circuits j series jk series dimensions mm(in.) d dia. t l ferrule 9, 25 15 15 a b a b 8.0(.315) 11.3(.445) 7.0(.276) 10.5(.413) 0.5(.020) 0.6(.024) 0.5(.020) 0.6(.024) 4.0(.157) 8.0(.315) 4.0(.157) 8.0(.315) j-mc25b-4 jk-mc15a-3 j-mc15a jk-mc15b-3 j-mc15b j-mc25a-4 mold cover a mold cover b *dimensions in [ ]are those for the j-mc15a. *dimensions in [ ]are those for the j-mc15b. 18.0(.709) 16.2(.638) [j-mc15a:24.4(.961)] 37.0(1.457)[37.6(1.480)] 7.8 (.307) 2.7 (.106) 18.0(.709) 17.4(.685) [25.6(1.008)] 7.4 (.291) 2.7 (.106) 37.0(1.457)[37.6(1.480)] 18.0(.709) 38.0(1.496) 39.0(1.535) 7.8 (.307) 2.7 (.106) 18.0(.709) 39.2(1.543) 39.0(1.535) 2.7 (.106) 7.4 (.291) * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. applicable cable diameter
719 mold cover assembly procedure assembly procedure 1. processing braided shielding wire pass the cable through ferrule b and remove the insulation at the end of the cable. install ferrule a and fold back the braided shielding wire along the outside insulation. then wind the copper foil tape around the shielding wire. 2. connecting the wires to the contacts connect the wires to the contacts by crimping and insert the contacts into the housing. j series circuits jk series material and finish q'ty / box or bag model no. parts name 9 15 25 15 mold cover a mold cover b ferrule a ferrule b mold cover a mold cover b ferrule a ferrule b mold cover a mold cover b ferrule a ferrule b jk-mc15a-3 jk-mc15b-3 jk-fl15a-8.0c jk-fl15b-11.3 j-mc15a j-mc15b j-fl15a-7.0c j-fl15b-10.5 j-mc25a-4 j-mc25b-4 jk-fl15a-8.0c jk-fl15b-11.3 steel, copper-undercoated, nickel-plated copper, tin-plated steel, copper-undercoated, nickel-plated copper, tin-plated steel, copper-undercoated, nickel-plated copper, tin-plated 500 200 250 1000 500 1000 500 1000 500 3. assembling the mold covers align mold cover b with mold cover a and press mold cover b until it engages the lances of mold cover a. install ferrule b over the cable holding section of the cover assembly and crimp ferrule b. this completes the assembly. note: contact jst for thumb screws. d subminiature connector j&jk series contact crimp applicator mks-rg with safety cover without safety cover applicator for the semi-automatic press ap-k2n jk-fl15b-11.3 aplmk jk-mc15 aplnc jk-mc15 j-fl15b-10.5 aplmk j-mc15 aplnc j-mc15 mold mold cover assembly thumb screw mold cover a mold cover b contact crimp style plug ferrule b ferrule a copper foil tape braided wire
720 covers d j&jk series subminiature connector accessories emi shielding aluminum die-cast cover (for 25-circuit j series connectors) 14.0 (.551) 20.0(.787) 55.0(2.165) 40.0(1.575) 19.0(.748) 4.0(.157) 45.0(1.772) m2.6 x 0.45(.018) this cover is made of aluminum die-cast . the d subminiature connector and all its wire connections can be completely covered to provide excellent shielding. this emi shielding cover can be used together with the hexagonal and rectangular metric lock screws specified in jis-c6361. this cover is ideally suited for rs-232c cable connectors. features model no. parts in one set cover material q ty / box jcb-25em aluminum die-cast 10 cover a - 1 pc. cover b - 1 pc. lock screw - 2 pcs. cable clamp - 2 pcs. cover screws and nuts - 2 pcs. for each clamp screws - 4 pcs. jis style plastic cover (for 25-circuit j series connectors) 14.0 (.551) 20.0(.787) 40.0(1.575) 19.0(.748) 4.0(.157) 45.0(1.772) 55.0(2.165) m2.6 x 0.45(.018) molded plastic cover. this cover can be used together with the hexagonal and rectangular metric lock screws specified in jis-c-6361. features model no. parts in one set cover material q ty / box jcb-25m abs resin 10 covers - 2 pcs. lock screw - 2 pcs. cable clamp - 2 pcs. cover screws and nuts - 2 pcs. for each clamp screws - 2 pcs. * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details.
721 dj jh jk & kh series lock screw block subminiature connector accessories lock screw block j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension / model no. dimension l mm(in.) model no. dimen- sion h mm(in.) type attachment q'ty / box 13.1(.516) 15.0(.591) 10.0(.394) 11.8(.465) jfs-4s-c1n jfs-4s-b1w jfs-4s-c1w jfs-4s-b1wm jfs-4s-c1wm kfs-4s-c1n kfs-4s-b1w kfs-4s-c1w kfs-4s-b1wm kfs-4s-c1wm sfs-4s-b1w sfs-4s-c1w sfs-4s-b1wm sfs-4s-c1wm 5.5(.217) hfs-4s-b1w hfs-4s-c1w hfs-4s-b1wm hfs-4s-c1wm a b spring washer .. 1 pc. nut ............ 1 pc. 2,000 spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated 4.8(.189) 5.5(.217) 4.8(.189) 5.5(.217) a varietly of accessories are available for the d subminiature connectors. m3 m3 l h 4.78(.188) m3 l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension / model no. dimension l mm(in.) model no. dimen- sion h mm(in.) type attachment q'ty / box 13.1(.516) 15.0(.591) 10.0(.394) 11.8(.465) 2,000 jfs-3s-c1n jfs-3s-b1w jfs-3s-c1w jfs-3s-b1wm jfs-3s-c1wm kfs-3s-c1n kfs-3s-b1w kfs-3s-c1w kfs-3s-b1wm kfs-3s-c1wm 5.5(.217) hfs-3s-b1w hfs-3s-c1w hfs-3s-b1wm hfs-3s-c1wm a b spring washer .. 1 pc. nut ............ 1 pc. spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated 4.8(.189) 5.5(.217) 4.8(.189) 5.5(.217) sfs-3s-b1w sfs-3s-c1w sfs-3s-b1wm sfs-3s-c1wm hexagonal lock screw block (metric thread: m3) type a type b no.4-40unc 4.78(.188) no.4-40unc no.4-40unc l h l h type a type b hexagonal lock screw block (inch thread: no.4-40unc)
722 d subminiature connector j jh jk & kh series m2.6 m2.6 l h 4.78(.188) m2.6 l h j series right angle through- hole type jk series straight through- hole type jk series right angle through- hole type j series straight through- hole type jh series right angle through- hole type kh series right angle through- hole type applicable series dimension / model no. dimension l mm(in.) model no. dimen- sion h mm(in.) type attachment q ty / box jfs-2.6s-c1n jfs-2.6s-b1w jfs-2.6s-c1w jfs-2.6s-b1wm jfs-2.6s-c1wm kfs-2.6s-c1n kfs-2.6s-b1w kfs-2.6s-c1w kfs-2.6s-b1wm kfs-2.6s-c1wm 5.5(.217) hfs-2.6s-b1w hfs-2.6s-c1w hfs-2.6s-b1wm hfs-2.6s-c1wm a b spring washer .. 1 pc. nut ............ 1 pc. 2,000 spring washer .. 1 pc. hexagonal lock screw & spring washer are integrated 4.8(.189) 5.5(.217) 4.8(.189) 5.5(.217) sfs-2.6s-b1w sfs-2.6s-c1w sfs-2.6s-b1wm sfs-2.6s-c1wm 13.1(.516) 15.0(.591) 10.0(.394) 11.8(.465) hexagonal lock screw block (metric thread: m2.6) 1.2(.047) 1.0(.039) 6.1(.240) 6.2(.244) 1.0(.039) 12.6(.496) m2.6 model no. q ty / box attachment jfs-2.6r-n spring washer 1 pc. set screw 1 pc. 1,000 rectangular lock screw block (metric thread: m2.6) type a type b
723 total dimension 6.2(.244) height of lock screw block 4.8(.189) panel thickness 0.8 (.031) spring washer thickness 0.6(.024) connector flange grounding adapter with threads pc board application examples of hexagonal lock screw blocks the resulting total dimension from the connector flange to the top of the hexagonal lock screw block must be 6.2mm(.244") after assembly. the d subminiature connector can be installed on the panel by simply tightening the hexagonal lock screw block together with grounding adapter, which has an identical thread to that of the f, g, and h types. extraction tool applicable connector model no. j series jk series plug receptacle dej-0.3 kej-0.7 kej-0.4 with this tool, contacts (connected to wires by crimping) can be easily removed if they are improperly inserted into plug and receptacle housings. dust cover (for receptacles) j dces jst 18.0(.709) 9.6(.378) 6.6(.260) circuits j series jk series q ty / box material model no. type j-dces j-dces-1 a b 9 15 nylon, ul94v-0, black 1,000 j dces-1 jst 18.0(.709) 9.6(.378) 7.4(.291) 25.0(.984) 33.0(1.299) 3.0(.118)dia. type a type b d subminiature connector j jh jk & kh series

▲Up To Search▲

Price & Availability of JBZ-25P-90

	To Download JBZ-25P-90 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .